RESIDENTIAL MAINTENANCE PROGRAMS
Emergency repairs cost 10 times more than planned repairs, yet reactive maintenance, “don’t fix it ‘til it breaks”, is still the mindset of most. Proactive maintenance can dramatically cut costs and boost productivity.
With our low cost residential maintenance programs you will maximize comfort for everyone in your home whatever the season, you will maximize efficiency for the lowest possible heating and cooling costs, you will maximize the life of your expensive heating and cooling equipment and minimize the risk from health hazards like carbon monoxide leaks and dust particles.
|
|
|
J.E. Shekell service technicians perform Spring & Fall Tune-Up. Receive a 15% discount on parts and labor on equipment repairs for a full year - including nights and weekends. |
In addition to the Spring and Fall Tune-Up, you get free labor on equipment repairs for a full year - including nights and weekends! Plus, a 15% discount on all parts! |
Our ultimate program covers all parts, labor and the Spring and Fall Tune-Ups for a full year. You never have to worry about unexpected repair costs. You're Covered! |
What is covered by the J.E. Shekell residential maintenance programs? |
| |
Spring Tune-Up |
|
Fall Tune-Up |
|
| |
- Inspect evaporator coil
- Check return air filter
- Flush drain and check drain pan
- Clean condenser coil
- Check electrical connections
- Check amperage of compressor and fan motor
- Check indoor blower motor for alignment and cleanliness
- Lubricate motor as needed
- Check noise and vibration levels
- Check operating pressures and refrigerant levels with gauges
- Check thermostat operation
- Examine all parts for visible wear
|
|
Gas Heating System
- Inspect flue, pipes and draft diverter
- Check heat exchanger
- Check vales, wiring, thermocouple, igniters and air filter
- Inspect blower for alignment and cleanliness
- Clean, inspect and adjust pilot assembly and all controls
- Check for proper operation, efficiency and leaks
- Check for carbon monoxide
Electric Heating and Heating Pumps
- Check, clean and lubricate motor
- Inspect belt condition, tension and alignment
- Check and adjust thermostat sequence control
- Inspect all electrical connections, air filter and heating elements
- Check defrost controls, condenser fan motor, refrigerant charge and defrost cycle
|
|
Residential Maintenance Programs have exclusions,
please speak to a J. E. Shekell, Inc. representative for full disclosure.
|
|
 |
